2012

Dias, Rosana A.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Closed loop operation of time-based accelerometers , 2012-12-20T14:16:52Z

Silva, J. M.; Machado, A. V.; Maia, J. M. – Transient rheological behaviour of PA6/EPM/EPM-g-MA blends , 2012-04-27T10:48:46Z

Novo, Paulo; Silva, J. F.; Nunes, J. P.; Hattum, F. W. J. van; Marques, A. T. – Development of a new pultrusion equipment to manufacture thermoplastic matrix composite profiles , 2012-10-24T14:25:07Z

Nunes, J. P.; Silva, J. F. – Production of thermoplastic matrix towpregs for highly demanding and cost-effective commercial applications , 2012-12-20T14:23:23Z

Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S. – An ontology model for the medical device development process in Europe , 2012-12-20T14:12:33Z

Treml Junior, C. A.; Leite, Janaina L.; Sousa, Adriano Fagali; Pouzada, A. S. – Morphological characterization of injection molded parts in Ren Shape 5166 polyurethane inserts for rapid tooling , 2012-09-24T15:58:25Z

Ribau, A. M.; Gonçalves, N. D.; Silva, Carolina; Nóbrega, J. M.; Carneiro, O. S. – Modelling the calibration/cooling stage of complex thermoplastic profiles , 2012-09-07T13:11:11Z

Bernardo, Gabriel; Bucknall, David G.; Shofner, Meisha; Sumpter, Bobby; Karim, Alamgir; Nabankur, Deb; Raghavan, Dharmaraj; Sides, Scott; Huq, Abul – Phase-morphology and molecular structure correlations in model fullerene-polymer nanocomposites , 2012-04-11T11:16:25Z

Esteves, F. R.; Pouzada, A. S.; Martins, Carla I. – Characterization of polypropylene structural foams for large part applications , 2012-08-24T17:03:23Z

Gonçalves, N. D.; Carneiro, O. S.; Nóbrega, J. M. – Flow balancing in extrusion dies for complex geometry profiles , 2012-10-04T16:15:31Z

Nunes, J. P.; Silva, J. F.; Marques, A. T. – Processing of continuous fibre reinforced thermoplastics , 2012-10-24T14:14:23Z

Cunha, Mara; Bernardo, Gabriel; Hilliou, L.; Wiggers, H.; Pereira, Ricardo – Morphology control of thin P3HT-Si-NCs composite films for hybrid photovoltaic cells , 2012-09-07T11:20:14Z

Machado, A. V.; Duin, M. van; Covas, J. A. – Dynamic vulcanisation of EPDM-Based thermoplastic vulcanisates during extrusion: effect of processing conditions , 2012-04-27T15:33:00Z

Cunha, Maria Manuela Cruz; Varajão, João; Miranda, Isabel; Lopes, Nuno; Simões, Ricardo – An e-marketplace of healthcare and social care services: the perceived interest , 2012-12-20T13:31:48Z

Mendes, F.; Duarte, J.; Vieira, Armando; Gaspar-Cunha, A. – Feature selection for bankruptcy prediction: a multi-objective optimization approach , 2012-05-14T16:36:57Z

Alves, F. S.; Dias, Rosana A.; Cabral, Jorge; Rocha, Luís A. – Pull-in MEMS Inclinometer , 2012-12-10T16:42:40Z

Nogueira, A. A.; Pouzada, P. S.; Martinho, P. G.; Pouzada, A. S. – A new way to produce conformal cooling channels by RPT for moulding blocks of the hybrid moulds , 2012-10-24T17:54:25Z

Sousa, Filipe; Viola, Lara; Ferreira, Liliana; Trevisan, Gabriela; Cunha, David; Alves, José Ferreira; Simões, Ricardo – An ecosystem of products and systems for ambient intelligence – the AAL4ALL users perspective , 2012-12-20T12:35:09Z

Mirkhalaf, Mohsen; Pires, Francisco; Simões, Ricardo – An efficient numerical integration algorithm for the single mode compressible leonov model , 2012-01-06T18:24:48Z

Neves, A. F.; Salmoria, G. V.; Ahrens, C. H.; Pouzada, A. S.; Silva, M. A. – Assessment of injection moulded parts of PP/nanoclay produced with hybrid moulds , 2012-08-24T17:17:14Z

Fernández-López, Helena; González-Jiménez, Daniel; González-Castaño, Francisco J.; Rocha, Luís A.; Afonso, José A. – IT-REHAB: Integral Telerehabilitation System , 2012-12-05T14:07:51Z

Sampaio, Álvaro M.; Pontes, A. J.; Simões, Ricardo – Ergonomic evaluation in product design for surgical instruments traceability , 2012-01-05T18:35:02Z

Silva, Eduarda; Sá, Ricardo; Ribeiro, Jorge; Sabaleuski, Anton; Nascimento, Filipe; Faro, Tiago; Simões, Ricardo – A practical framework for the generation and selection of strategic plans of action : the relevance of timeframe considerations and a systems thinking approach , 2012-12-20T12:26:28Z

Simões, Ricardo; Sousa, Joana; Silva, Cristina Nogueira; Gamboa, Hugo – Optimizing electrode positioning in 3-lead ECG chest devices , 2012-12-20T12:11:27Z

Teixeira, Cristina; Covas, J. A.; Stützle, Thomas; Gaspar-Cunha, A. – Optimization of Co-rotating twin-screw extruders using pareto local search , 2012-04-11T14:46:57Z

Dencheva, Nadya Vasileva; Oliveira, J.; Carneiro, O. S.; Nunes, Teresa G.; Denchev, Z. – Preparation and Properties of Novel In-situ Composite Materials Based on Polyethylene-Polyamide Oriented Blends , 2012-03-27T11:33:41Z

Sepúlveda, A. T.; Guzmán de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, Luís A. – Flexible pressure sensors: modeling and experimental characterization , 2012-12-05T17:49:36Z

Domingues, N.; Gaspar-Cunha, A.; Covas, J. A. – Assessing the mixing performance of extruders: indices and scale-up , 2012-04-27T13:54:38Z

Carvalho, Irene; Araújo, António; Kirchain, Randolph; Simões, Ricardo; Silva, Arlindo – Reengineering the concept of urban cars: a case study , 2012-12-20T12:43:26Z

Campos, A. R.; Cunha, A. M.; Tielas, A.; Mateos, A. – Biodegradable composites applied to the automotive industry: the development of a loudspeaker front , 2012-03-21T12:08:55Z

Leite, Janaina L.; Salmoria, Gean V.; Ahrens, Carlos H.; Pouzada, A. S. – Characterization of epoxy/steel fibres composites for hybrid injection moulds , 2012-08-24T17:10:25Z

Hancic, A.; Kuzman, K.; Kosel, F.; Andrej, G.; Cunha, A. M.; Gantar, G. – Mechanical and processing characterization of effective behavior of wood-plastic composites by analytical and numerical simulation. , 2012-03-21T12:33:44Z

Lopes, João Pedro; Correia, Alexandre; Silva, Jaime; Pires, Francisco; Lanceros-Méndez, S.; Simões, Ricardo – Modelação computacional multiescala de materiais poliméricos : comportamento mecânico à mesoescala , 2012-01-05T18:51:21Z

Nascimento, Filipe; Silva, Eduarda; Sá, Ricardo; Sabaleuski, Anton; Ribeiro, Jorge; Faro, Tiago; Simões, Ricardo – Structured approach for strategic planning in complex systems: methodology and company-based case study , 2012-01-05T19:00:16Z

Dias, Rosana A.; Macedo, Pedro; Silva, Hélder D.; Wolffenbuttel, R. F.; Cretu, E.; Rocha, Luís A. – Closed-loop operated time-based accelerometer , 2012-12-10T16:40:03Z

Ferreira, Alexandre; Ferreira, Fernando; Paiva, M. C. – Textile sensor applications with composite monofilaments of polymer / carbon nanotubes , 2012-12-20T12:44:43Z

Gama, Sílvio M. A.; Fernandes, Célio Bruno Pinto; Gaspar-Cunha, A. – Métodos espectrais aplicados ao filme de fundido de um processo de extrusão de Polímeros , 2012-04-30T09:28:45Z

Gonçalves, N. D.; Ribau, A. M.; Carneiro, O. S.; Nóbrega, J. M. – Computer aided design of extrusion dies for complex geometry profiles , 2012-09-05T11:12:49Z

Hede, Shantesh; Ferreira, Paula Varandas; Lopes, Manuel Nunes; Rocha, Luís A. – TRIZ and the paradigms of social sustainability in product development endeavors , 2012-12-05T16:46:52Z

Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C.; Gaspar-Cunha, A. – Using multi-objective evolutionary algorithms in the optimization of polymer injection molding , 2012-04-27T13:50:45Z

Gaspar-Cunha, A. – Feature selection using multi-objective evolutionary algorithms : application to cardiac SPECT diagnosis , 2012-02-29T16:03:44Z

Machado, A. V.; Gaspar-Cunha, A.; Covas, J. A. – Modelling of the grafting of maleic anhydride onto polyethylene in an extruder , 2012-04-24T16:05:56Z

Veloso, Fernando; Sampaio, Álvaro M.; Chaves, Filipe; Simões, Ricardo – A creative solution for rapid and inexpensive model-making in product design processes , 2012-01-06T18:46:41Z

Ribeiro, Bernardete; Silva, C.; Vieira, Armando; Gaspar-Cunha, A.; Neves, João – Financial distress model prediction using SVM + , 2012-04-11T14:53:25Z

Gaspar, J.; Bártolo, Paulo Jorge; Duarte, F. M. – Cure and rheological analysis of reinforced resins for stereolithography , 2012-03-20T11:15:24Z

Silva, C. S.; Dias, Rosana A.; Viana, J. C.; Pontes, A. J.; Rocha, Luís A. – Static and dynamic modeling of a 3-axis thermal accelerometer , 2012-12-10T17:03:24Z

Covas, J. A.; Gaspar-Cunha, A. – Use of multi-objective evolutionary algorithms in extrusion scale-up , 2012-04-23T17:04:57Z

Carneiro, O. S.; Nóbrega, J. M.; Mota, Armando R.; Matos, Sónia – Profile extrusion calibration: charaterization of the contact resistance at the polymer-calibrator interface , 2012-09-28T16:36:27Z

Rocha, L. A.; Silva, C. S.; Pontes, A. J.; Viana, J. C. – Design of a 3-axis thermal accelerometer using an electro-thermo-fluidic model , 2012-12-20T14:24:21Z

Esteves, F. R.; Pouzada, A. S.; Martins, Carla I. – Formulation and characterization of polypropylene structural foam for large parts , 2012-01-16T16:04:21Z